Commercial Application Commercial Application
Military Application
Hydro Mite Stand
E-mail Us E-mail Us
hydromite_hm





unit_photo


The Hydro Mite Landing Gear Strut Service Stand is designed to service aircraft oleo-pneumatic landing gear shock struts at all maintenance levels with filtered hydraulic oil and nitrogen. The stand is a self-contained, portable, hydraulic pumping unit which will accurately service aircraft landing gear shock struts with fresh oil and nitrogen in minutes, ensuring rapid aircraft turnaround. The system includes a gasoline, diesel, propane, or electric driven high pressure pump with pressure compensator, micron filters, one forty-gallon fresh oil tank, one forty-gallon waste oil tank, and forty feet of high pressure hose on each retractable hose reel. Control of flow to and from the strut is achieved through the use of valves on the instrument panel. The system is housed within a weather-resistant steel cabinet mounted on a pneumatic tire trailer assembly finished in white paint and black anodized instrument panel. Instruments and controls are permanently nameplated to identify their function. Hinged doors provide quick access for routine inspection, maintenance, and service. A heavy duty towbar with lunette eye and steerable front wheel make the unit highly maneuverable and facilitates towing speeds up to twenty miles-per-hour. Hand-operated parking brakes are provided.


LANDING GEAR STRUT SERVICE STAND
Model: HM-GT1-C



LEADING PARTICULARS


SERVICE MEDIUM

MIL-H-5606 Oil or Equivalent
MIL-H-83282 Oil or Equivalent

INSTRUMENTATION

Pressure Gauge: WIKA
Liquid Filled - 4 inch
0-5000 PSI Range

Fluid Sight Gauge: Hydro Craft
Pyrex Glass Tube

Volt Meter: S.S. White
10 Volts to 16 Volts

Hour Indicator: Hobbs
Vibration Dampered
0-9999 Hours

MAJOR COMPONENTS

Power Unit:

Gasoline Model: Robin
Air-cooled two-cylinder,
four-cycle engine, Model EH65

Diesel Model: HATZ
Air-cooled, one-cylinder,
four-stroke engine, Model 1D80 Series

  • Electric and Propane Models
    Available

NATIONAL STOCK NUMBERS

ELECTRIC POWERED

  • 4320-01-437-8616

DIESEL POWERED

  • 4320-01-437-8381


Hydraulic Pump: Rexroth

Variable volume, pressure
compensating, piston-type
pump, 290 to 4,000
PSI, 5 GPM.

Hose Reels: Lincoln

Two heavy duty industrial
reels with 40' high pressure
hose.

Filtration: Cross

Heavy duty, spin-on,
10 micron filters with
condition indicator.

Chassis:

Three wheel, 5.70 x 8.00
inch pneumatic tires, and
hand operated rear wheel
parking brakes.

Fork lift tubes, tie down rings,
heavy duty towbar with lunette
eye, steerable front wheel.

Fresh Oil and Waste Oil Reservoirs:

Two forty-gallon capacity tanks
with liquid level sight gauge
and ball valve drain. Cannot
cross contaminte.


OVERALL DIMENSIONS
   
  Length:     103       inches
  Width:        54         inches
* Height:      50         inches
* Weight:     1400     pounds

* WITHOUT NITROGEN
TANKS OR TOOL BOX

Protected by U.S. Patent
No. 3889904



E-Mail Us

rentfrow inc. address
Copyright Rentfrow, Incorporated, 1999 - 2009. All rights reserved.